DayPlus 2-Ton Scissor Jack with Ratchet Handle

DayPlus 2-Ton Scissor Jack with Ratchet Handle

Keep a compact emergency car jack in your roadside kit for tire changes and basic wheel access. This steel scissor jack uses a geared lifting mechanism and included hexagonal wrench to raise compatible small and medium vehicles from a low starting height to approximately 390 mm.

Product details

• Rated lifting capacity: 2.0 tons, subject to the manufacturer's capacity and height instructions
• Lift range: Approximately 110-390 mm, with the source also listing about 385 mm maximum in one specification
• Material: Steel
• Color: Black
• Product size: Approximately 50 x 24 x 11 cm
• Net weight: Approximately 2 kg
• Operation: Ratchet-style crank and included hexagonal wrench
• Recommended use: Emergency tire changes for compatible small and medium vehicles
• Included: One scissor jack and one hexagonal wrench

Before ordering

Check your vehicle owner's manual for the required lifting capacity, approved lift points, and minimum clearance. The 2-ton rating and lift range do not guarantee compatibility with every vehicle. Confirm that the closed jack fits beneath the vehicle and that the maximum height reaches the manufacturer's lift point.

Safe operating procedure

1. Park on a hard, level surface, switch on hazard lights, turn off the engine, engage the parking brake, and place the transmission in Park or Reverse as appropriate.
2. Chock the wheel diagonally opposite the wheel being lifted.
3. Use only the vehicle manufacturer's approved lifting point and keep the jack centered and stable.
4. Raise the vehicle only as high as needed for the tire change. Never exceed the rated capacity or the vehicle manufacturer's instructions.
5. Never work beneath a vehicle supported only by this jack. Use properly rated jack stands for any work under a vehicle.
6. Lower the vehicle slowly, remove the jack, and confirm the vehicle is stable before driving.

Inspection and care

Check the jack before every use for cracked welds, bent parts, loose hardware, leaks, or other damage. Remove it from service after an abnormal load or shock until it has been inspected. Keep the screw and moving parts clean and lubricated, store the handle safely, and keep the lifting arm fully lowered when the jack is stored. Do not modify the product.

Frequently asked questions

What is the lifting capacity?
The listed capacity is 2.0 tons. Always follow the vehicle manufacturer's requirements and the jack's capacity instructions.

What is the lifting range?
The listed range is approximately 110-390 mm. One specification lists about 385 mm as the maximum, so confirm the exact range for your vehicle before use.

Is the jack suitable for SUVs or trucks?
It is described for small and medium vehicles. Check your vehicle's weight, clearance, lift points, and required lift height before ordering.

What comes in the package?
The listing includes one steel scissor jack and one hexagonal wrench.

Can I use it to support a vehicle while I work underneath?
No. This jack is intended for emergency tire changes. Never go beneath a vehicle supported only by a jack. Use properly rated jack stands and follow safe workshop procedures.

What surface should I use?
Use the jack only on a hard, level, stable surface. Do not use it on soft ground, loose gravel, a slope, or an unstable shoulder.