DIYHD 34-Inch Concealed Barn Door Hardware Kit with Soft Close

Create a clean, floating look for an interior sliding barn door with this DIYHD concealed wall-mount hardware kit. The selected option is a 34-inch track kit designed for a wood door and an opening of approximately 28-30 inches.

Important: Hardware Only

This listing is for sliding-door hardware only. The wood door panel is not included. The door must be prepared and installed separately according to the supplied measurements and instructions.

Fit and Compatibility

• Selected track option: 34-inch track kit
• Opening width listed for the 34-inch track: approximately 28-30 inches
• Suitable door material: Wood door listed
• Door weight capacity: Up to 176 lb or 80 kg
• Door thickness: 1-1/4 to 1-3/4 inches
• Wall-mount sliding system with concealed or floating-style track appearance
• Track can be cut for a smaller door panel according to the source

Hardware Described

• Top track or rail
• Soft-close mechanisms, listed as two pieces
• End caps, listed as two pieces
• Top roller
• Stops, listed as two pieces
• Floor rollers, listed as two pieces
• Bottom rail
• Floor guide
• Installation hardware and accessories

Floor-Hardware Note

The source contains conflicting package information. One package list includes a bottom rail, floor rollers, and floor guide, while a later note describes a newer hidden floating kit without a floor rail. Confirm the exact floor-hardware configuration for the selected 34-inch kit before ordering.

Product Specifications

• Brand: DIYHD
• Product type: Concealed sliding barn-door hardware kit
• Track length selected: 34 inches or approximately 86.4 cm
• Track style: Concealed or invisible wall-mount design described
• Closing function: Soft close
• Door panel: Not included
• Origin listed: Mainland China

Installation Planning

Measure the opening, door thickness, available wall space, and mounting structure before ordering. The 34-inch track is associated with an opening of about 28-30 inches in the source. Confirm that the wall can support the hardware and the loaded door weight, and install into suitable structural material using the required fasteners.

Use the included instructions for door preparation and assembly. A qualified installer may be appropriate for heavy doors, structural mounting, or unusual wall construction.

Before You Buy

• Confirm that the 34-inch track is correct for your opening.
• Confirm the door will be between 1-1/4 and 1-3/4 inches thick.
• Confirm the finished door weight will not exceed 176 lb or 80 kg.
• Plan to supply a compatible wood door panel because it is not included.
• Verify whether the selected kit includes the floor rail, floor rollers, and floor guide.
• Check the wall structure, clearances, door swing area, and handle position before drilling.
• The source does not provide a complete mounting-surface requirement, fastener specification, assembled clearance diagram, or finished door dimensions.

Frequently Asked Questions

Is the door included?

No. The source states that this is hardware only and does not include the door panel.

What size track is selected?

The visible option is a 34-inch track kit, approximately 86.4 cm.

What opening does it fit?

The source associates the 34-inch track with an opening approximately 28-30 inches wide.

What door thickness is supported?

The listed door thickness is 1-1/4 to 1-3/4 inches.

How heavy can the door be?

The source lists a maximum door weight of 176 lb or 80 kg.

Does it include soft close?

Yes. The hardware description lists soft-close mechanisms.

Does it include a floor rail?

The source is inconsistent. One package list includes floor hardware, while another note describes a newer version without a floor rail. Confirm the selected kit contents before ordering.